DRILL-LUBE MDA-2800

DRILL-LUBE MDA-2800

Description

None

Packaging

  • None

High-Temperature Drilling Lubricant for Rotary Drilling or Coiled Tubing

DRILL-LUBE MDA-2800 reduces drilling torque and drag, minimizes pipe sticking, and increases bit life. The most effective application is in oil-based mud (OBM) deep and deviated wells. It meets and consistently exceeds requirements specified by NPDES, pertaining to Gulf of Mexico discharges, and does not increase toxicity of the base mud, LC-50 of 465,685 ppm at 5 volume %. DRILL-LUBE MDA-2800 is also non-foaming, nonfluorescent, non-surface active and compatible with other typical drilling mud components. DRILL-LUBE MDA-2800 can be added directly to the mud hopper or to the mud pit. DRILL- LUBE MDA-2800 should be kept in closed drums or bulk containers to avoid contact with air or moisture when not in use. To facilitate handling, it may be heated to 130° F (54° C) without adverse effects. DRILL-LUBE MDA-2800 should be maintained between 80-100° F. Exposure to 0° F for a prolonged time period will solidify. To return the material to its original condition, cold drums should be warmed to 80-100° F. Blending temperature should not exceed 130° F

Blended with 5% emulsifier, DRILL-LUBE MDA-2800 is also an excellent lubricant for coiled- tubing, rendering 70% friction reduction in metal-to-metal contact at 1% level in CT fluid. The water-based mud (WBM) containing 1% of DRILL-LUBE MDA-2800 retains adequate rheology viscosities and gel strength, and excellent lubricity or friction reduction after being aged (AHR) for 16 hours and at either 150° F, 250° F, or 350° F.

TYPICAL PROPERTIES CHART
APPEARANCE DARK AMBER FLUID
VISCOSITY, cSt @ 100°C 290
VISCOSITY, cSt @ 40°C 22
SPECIFIC GRAVITY 1.1
LBS./GALLON @ 60°F 9.2
FLASH POINT, COC, @ °F 380°F
POUR POINT, @ °C 2°C
TYPICAL TESTS RESULTS CHART
LABORATORY HOT-ROLLED (AHR), RHEOLOGY @ 150°F AGING 16 HRS. 1% LEVEL
600 RPM 300 RPM PV YP 10s GEL 10m GEL
BLANK 37 24 13 11 4 9
1% MDA-2800 51 33 18 15 5 14
LABORATORY HOT-ROLLED (AHR), RHEOLOGY @ 350°F AGING 16 HRS. 1% LEVEL
600 RPM 300 RPM PV YP 10s GEL 10s GEL
BLANK MUD 47 33 14 19 16 38
1% MDA-2800 32 27 5 22 19 24
TORQUE, LB-IN, LABORATORY HOT-ROLLED (AHR), @ 350°F, 1% LEVEL
@ 150 LBS. @ 200 LBS. @ 250 LBS. @ 300 LBS.
BLANK MUD 26 43 54 62
1% MDA-2800 11 13 16 18
SAFETY DATA SHEET
1. Identification
Product identifier Drill-lube MDA 2800
Other means of identification None.
Recommended use Lubricant Additive
Manufacturer/Importer/Supplier/Distributor information Manufacturer
Company name Address Sterrex Industries 9143 U.S. Hwy. 259 N. Longview, TX 75605 United States
Telephone 1-800-898-8842
Website www.gearflyproducts.com
Email
Emergency phone number
  • CHEMTREC (U.S. and Canada) 1-800-424-9300
  • CHEMTREC (Outside the U.S.) 1-703-741-5970
2. Hazard(s) identification
Physical hazards Not classified.
Health hazards Not classified.
Environmental hazards Not classified.
OSHA defined hazards Not classified.
Label elements
  • Hazard symbol
  • Signal word
  • Hazard statement
  • Precautionary statement
    • Prevention
    • Response
    • Storage
    • Disposal
  • None.
  • None.
  • The mixture does not meet the criteria for classification.

  • Observe good industrial hygiene practices.
  • If exposed or concerned: Get medical advice/attention.
  • Store away from incompatible materials.
  • Dispose of waste and residues in accordance with local authority requirements.
Hazard(s) not otherwise classified (HNOC) None known.
Supplemental information None
3. Composition/information on ingredients Mixtures
The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200.
4. First-aid measures
Inhalation Move to fresh air. Call a physician if symptoms develop or persist.
Skin contact Wash off with soap and water. Get medical attention if irritation develops and persists
Eye contact Rinse with water. Get medical attention if irritation develops and persists
Ingestion Rinse mouth. Get medical attention if symptoms occur.
Most important Direct contact with eyes may cause temporary irritation
symptoms/effects, acute and delayed
Indication of immediate medical attention and special treatment needed Treat symptomatically.
General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.
5. Fire-fighting measures
Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Unsuitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.
Specific hazards arising from the chemica During fire, gases hazardous to health may be formed.
Special protective equipment and precautions for firefighters Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Fire fighting equipment/instructions Move containers from fire area if you can do so without risk.
Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.
General fire hazards No unusual fire or explosion hazards noted
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.
Methods and materials for containment and cleaning up Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.
Environmental precautions Avoid discharge into drains, water courses or onto the ground.
7. Handling and storage
Precautions for safe handling Observe good industrial hygiene practices
Conditions for safe storage, including any incompatibilities Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS).
8. Exposure controls/personal protection
Occupational exposure limits No exposure limits noted for ingredient(s).
Biological limit values No biological exposure limits noted for the ingredient(s).
Appropriate engineering controls Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Individual protection measures, such as personal protective equipment
Eye/face protection Wear safety glasses with side shields (or goggles).
Skin protection
  • Hand protection
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier.
Other Wear suitable protective clothing.
Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
General hygiene considerations Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance Viscous
Physical state Liquid.
Form Liquid.
Color Black.
Odor Sulphurous.
Odor threshold Not available.
pH Not available.
Melting point/freezing point Not available.
Initial boiling point and boiling range 350.01 °F (176.67 °C) estimated
Flash point > 405.0 °F (> 207.2 °C) Cleveland Open Cup
Evaporation rate Not available.
Flammability (solid, gas) Not applicable.
Upper/lower flammability or explosive limits
Flammability limit - lower (%) Not available
Flammability limit - upper (%) Not available
Explosive limit - lower (%) Not available
Explosive limit - upper (%) Not available
Vapor pressure Not available.
Vapor density Not available.
Relative density Not available.
Solubility(ies)
Solubility (water) Not available.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature Not available.
Auto-ignition temperature Decomposition temperature
Viscosity 850 - 1250 SUS
Viscosity temperature 100 °F (37.78 °C)
Other information
  • Density - 1.10 g/cm³ estimated
  • Explosive properties - Not explosive.
  • Flammability class - Combustible IIIB estimated
  • Oxidizing properties - Not oxidizing.
  • Pour point - 30.2 °F (-1 °C)
  • Specific gravity - 1.1
10. Stability and reactivity
Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport
Chemical stability Material is stable under normal conditions.
Possibility of hazardous reactions No dangerous reaction known under conditions of normal use
Conditions to avoid Contact with incompatible materials.
Incompatible materials Strong oxidizing agents.
Hazardous decomposition products Hydrogen chloride. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
10. Stability and reactivity
Information on likely routes of exposure
Inhalation Low vapor pressure makes inhalation unlikely at standard temperatures and pressures.
Skin contact May be irritating to the skin.
Eye contact Direct contact with eyes may cause temporary irritation.
Ingestion Do not ingest. Expected to be a low ingestion hazard.
Symptoms related to the physical, chemical and toxicological characteristics Occupational exposure to the substance or mixture may cause adverse effects.
Information on toxicological effects
Acute toxicity Not available
Skin corrosion/irritation Prolonged skin contact may cause temporary irritation.
Serious eye damage/eye irritation Direct contact with eyes may cause temporary irritation.
Respiratory or skin sensitization
Respiratory sensitization Not a respiratory sensitizer.
Skin sensitization This product is not expected to cause skin sensitization.
Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.
Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
  • IARC Monographs. Overall Evaluation of Carcinogenicity - Not available.
  • OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) - Not listed.
  • US. National Toxicology Program (NTP) Report on Carcinogens - Not available
Reproductive toxicity Not available.
Specific target organ toxicity - single exposure Not classified.
Specific target organ toxicity - repeated exposure Not classified.
Aspiration hazard Not an aspiration hazard.
12. Ecological information
Ecotoxicity The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.
Persistence and degradability No data is available on the degradability of this product.
Bioaccumulative potential No data available
Mobility in soil No data available
Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations
Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Local disposal regulations Dispose in accordance with all applicable regulations.
Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste disposal company.
Waste from residues / unused products Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions).
Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.
14. Transport information
  • DOT - Not regulated as dangerous goods
  • TDG - Not regulated as dangerous goods.
  • IMDG - Not regulated as dangerous goods.
  • IATA - Not regulated as dangerous goods.
Transport in bulk tankers according to Annex II of MARPOL 73/78 and the IBC Code Not established.
15. Regulatory information
US federal regulations All components are on the U.S. EPA TSCA Inventory List. This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
CERCLA Hazardous Substance List (40 CFR 302.4) Not listed.
SARA 304 Emergency release notification Not listed.
OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories
  • Immediate Hazard - No
  • Delayed Hazard - No
  • Fire Hazard - No
  • Pressure Hazard - No
  • Reactivity Hazard - No
SARA 302 Extremely hazardous substance Not listed.
SARA 311/312 Hazardous No
SARA 313 (TRI reporting) Not regulated.
Other federal regulations
  • Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List - Not regulated.
  • Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) - Not regulated.
  • Safe Drinking Water Act (SDWA) - Not regulated.
US state regulations
  • US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) - Not listed.
  • US. Massachusetts RTK - Substance List - Not regulated.
  • US. New Jersey Worker and Community Right-to-Know Act - Not listed.
  • US. Pennsylvania Worker and Community Right-to-Know Law - Not listed.
  • US. Rhode Island RTK - Not regulated.
  • US. California Proposition 65 - California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins.
International Inventories
Country(s) or region Inventory name On inventory (yes/no)*
Australia Australian Inventory of Chemical Substances (AICS) No
Canada Domestic Substances List (DSL) No
Canada Non-Domestic Substances List (NDSL) No
China Inventory of Existing Chemical Substances in China (IECSC) No
Europe European Inventory of Existing Commercial Chemical Substances (EINECS) No
Japan Inventory of Existing and New Chemical Substances (ENCS) No
Korea Existing Chemicals List (ECL) No
New Zealand New Zealand Inventory No
Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) No
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s).
16. Other information, including date of preparation or last revision
Issue date 07-07-2017
Revision date 08-14-2017
Version # 04
HMIS® ratings Health: 0
Flammability: 1
Physical hazard: 0
Personal protection: B

Disclaimer Sterrex Industries cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its product, may be used. It is the user’s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience currently available.
Revision Information Composition / Information on Ingredients: Ingredients
Physical & Chemical Properties: Multiple Properties

Toxicological Information: Toxicological Data
Regulatory Information: United States
GHS: Classification